Deck Maker Set — One Piece Card Game Deck Box

About This Model

The OreKo Deck Maker Set is the ultimate One Piece Card Game deck box kit. This is not just a single deck box — it is a full maker set that lets you mix and match logos, cases, and caps to build the perfect custom deck box for your collection.

The set includes deck box bottoms, caps with logo artwork, blank cases for custom builds, two sample Luffy-themed cases, a coin and keychain maker file, and all the individual logo files for Luffy, Luffy Gear 5, Devil Fruit, RA, UTA, Bark Gecko Moria, Yamato, and Devil Fruit cut-outs for your own experimentation.

Designed for the One Piece Card Game standard format, it fits single-sleeved and double-sleeved decks and includes a dedicated front slot for your commander card. Everything needed to make it your own is in the download.

What’s Included — Plate by Plate

The Bambu Studio 3MF files are pre-plated with colors set up. Here is what each plate contains.

Plate 2 — Main Devil Fruit
Devil Fruit logo cap and case components.

Plate 3 — Blank Case, Cap & Sleeve
Blank case and cap for custom use, plus the sleeve holder component.

Plate 4 — Luffy Gear 5 Box Samples
Two pre-configured Luffy Gear 5 sample box prints ready to slice.

Plate 5 — Experimental Cases
Older and experimental case models included as bonus files.

Plate 6 — Luffy Coin & Blank
Coin and keychain maker files plus an additional blank case.

Full Bambu 3MF Overview
All plates as configured in Bambu Studio with multi-color setup ready to go.

Printing Tips

This is a multi-component set, so print settings vary by part. Here is how to get the best results from each piece.

Caps and logo tops: Drop down to 0.08mm layer height for the sharpest logo detail. At this layer height the Jolly Roger, Gear 5, and Devil Fruit artwork comes out clean and sharp. Use 100% infill with a lines pattern.

Box bottoms: These do not need fine detail. Print at 0.20mm for speed. If you want a stiffer, more durable box go with 6 wall lines on the strong setting. The standard 2-wall setting is lighter and prints faster.

Multi-color Bambu users: Open the 3MF file directly in Bambu Studio. Colors and filament assignments are already set up on each plate. Swap in your own filament colors as needed and hit slice.

Single-color printing: Use the individual STL files. Print the cap and logo in different colors and swap them for a two-tone effect without needing an AMS.

About One Piece Card Game Deck Boxes

The One Piece Card Game uses standard TCG card dimensions. Unsleeved cards are 63 x 88mm. With a single sleeve they run approximately 65 x 90mm, and with double sleeves closer to 68 x 93mm. This deck box is designed to fit both single and double sleeved configurations.

A standard One Piece Card Game deck is 50 cards. The commander card sits in the dedicated front slot on the box, giving it its own display window separate from the main deck.

The maker set format means you are not locked into one look. Print a black box with a red Luffy cap one week, and swap the cap for a Devil Fruit logo the next. The caps are designed to be interchangeable across the base cases in this set.